LIAN LI releases a follow-up notice regarding the power delivery issues of the HydroShift II LCD-C 360 all-in-one liquid CPU cooler. This includes an updated PCB for the HydroShift II LCD-C 360TL and 360N models produced on or after June 12, 2025, improving power regulation and eliminating the need for BIOS tweaks. Existing users with earlier models can request a free 6-pin cable and a bonus gift to resolve screen or USB issues more easily. Read LIAN LI’s updated notice below.
Improved Power Delivery Updated PCB
Starting with all production models on and after June 12, 2025, the HydroShift II LCD-C 360TL and 360N will come pre-installed with an updated PCB. This revised PCB improves internal power regulation and removes the need for any BIOS adjustments for stable operation.
How to Check the Production Date of Your HydroShift II LCD-C
To determine when your HydroShift II LCD-C was produced, please refer to its product serial number.
A typical serial number looks like this: LLH236NB250502789-2864
If your serial number starts with LLH, your unit was produced before June 12, 2025 and may not have the updated PCB version.
For Existing Users Free 6-Pin Cable & Appreciation Gift
If you purchased a HydroShift II LCD-C 360TL or 360N that is produced before June 12, 2025, and experienced screen or USB recognition issues, a simple BIOS setting adjustment can resolve the issue in most cases (see next section).
However, for users who are not familiar with BIOS settings, we now offer a free 6-pin power cable as an alternative, plug-and-play solution.
As a gesture of appreciation, users requesting this cable will also receive a free giftyour choice of either:
a Wireless Fan Power Bank, or
an EDGE Fan Hub.
To submit your request, please visit: Support Request Form
Quick BIOS Adjustment No Cable Required
If youre comfortable entering your motherboard BIOS, the issue can be resolved quickly without needing the 6-pin cable:
1- Enter your motherboards BIOS.
2- Locate the fan header connected to the HydroShift II LCD-C 360 (recommended: CPU FAN, AIO PUMP, or PUMP).
3- Set the fan header to PWM or DC mode (do not use AUTO).
4- Set the fan port to Full Speed (100%).
5- Save changes and exit BIOS.
6- Once back in Windows, perform one additional reboot for settings to fully apply.
For detailed instructions, visit: HydroShift II USB Setup Guide
Thank you again for your continued support and understanding. We remain committed to improving your experience and delivering reliable, high-performance cooling solutions.
The LIAN LI Team